|
- Click "Dial-up Networking" then "Make New
Connection"
- Type "Cyberbay" for the computer you are dialing.
Choose "Next".
- Type in the phone number that you wish to use and then click
"Next".
- If you are in an area code that is different than our dialup
number then you will need to add the area
code of our dialup number as part of the number itself. In other words, make it a 10 digit
number instead of 7 digits. Do not add it in the area
code section.
- If you will be dialing in from a long distance location, then
you will need to add the area code in the area code section and delete it from the dialup
number section.
- ISDN users please note: Type in the ISDN phone number you will be using only one time for 1b (64k)
connection or two times seperated by an & symbol for 2b (128k) and then click
"Next" and then "Finish". You can only type in the number twice if you
have a 128K connection package. To type in the number twice, use this format example, do not use these numbers!: "9999999999&999999999" Do
not add the area code in the area code section. If you will be dialing in from a long
distance location, then you will need to add the area code in the area code section and
delete it from the dialup number section.
- Type "Cyberbay" in the text box and click
"Finish" (You should be able to see a Cyberbay Icon in the Dial-up Networking
Group)
- Use the "Right" mouse
button to click Once on the Cyberbay Icon and
choose "Properties".
- (use left mouse button from now on) Click on the "Server
Type" button.
- Choose "PPP:Internet,WindowsNT Server,Win98"
in Type of Dial-up Server.
- Make sure only "Enable software compression"
is checked in the Advanced option section.
- Make sure only "TCP/IP" is checked in the
Allowed network protocol section.
- Click on "TCP/IP" settings
- Make sure "Server Assigned IP address" is chosen
- Choose "Server Assigned Name Server addresses"
- Make sure the "Enable IP header compression" and
"Use default gateway" are both checked marked ...then click OK...OK...and
again...OK
- Finally, double click the "Cyberbay" Icon and
provide the username (your login ID) and password (remember login id and password are
case-sensitive).
- Click on "Connect" button. This should allow your
modem to connect with our servers.
- Now minimize the connection screen and proceed to use any
Internet application that you want to use such as Eudora, Netscape, Internet Explorer,
etc.....
|
