| How to Configure
Pipeline 25/50/75 for Dial Up with NAT
(Network Address Translation)
Assume:
a. Your user name is username
b. the " --> " in this page means right arrow key of your keyboard.
c. To save your changes, press Escape Twice, then press 2 - Exit and Accept.
1. open Pipeline 75 User interface
2. Following menu will appear:
Configure...
10-000 System
20-000 Ethernet
30-000 Serial Lan
3. From Configure --> Switch Type = xx-x (*depends
on telephone company)
Chan Usage = Switch/Switch
My Num A = xxxxxxx
(*Use your number)
My Num B = xxxxxxx
Spid 1 =
xxxxxxxxxxxx (*Use your number)
Spid 2 =
xxxxxxxxxxxx (*Use your number)
My Name = (your
username in lowercase)
My Addr =
192.168.100.1/28
Rem Name = isdn
Rem Addr = 100.100.100.100/24
Dial # =
7138436878
Route = IP
Bridge = No
Send Auth = PAP
Send PW = <<your
password>>
Recv Auth = None
Recv PW = None
4. From :
Ethernet --> Connections --> isdn -->
station = isdn
Active = Yes
Encaps = MPP (*1B use PPP)
Dial # = 7138436878
Calling#= 7138436878
Route IP= Yes
Encaps options.. -->
Send Auth = PAP
Send PW
= <<your password>>
DBA Monitor = Transmit
Base Ch Count = 1 (2 for 2B)
Min Ch Count = 1 (2 for 2B)
Max Ch Count = 2
.
.
. (use default)
IP options.. -->
LAN Adrs = 0.0.0.0/0
WAN Alias = 0.0.0.0
IF Adrs = 0.0.0.0/0
.
RIP
= Off
5. From:
Ethernet --> NAT.. --> NAT..
Routing = Yes
Profile = isdn
FR address = 0.0.0.0
LAN=Single IP addr
Static Mappings...
.
. (use defaults)
6. From :
Ethernet --> Static Rtes --> default -->
name = default
Active = Yes
Dest = 0.0.0.0/0
Gateway = 0.0.0.0/0
7. From :
Ethernet --> Mod Config --> Ether options -->
IP Adrs = 192.168.100.1/28
2nd Adrs= 0.0.0.0/0
RIP = Off
Ignore Def Rt = Yes
Proxy Mode = off
8. From :
Ethernet --> Mod Config -->
Bridging = No
IPX Routing = No
DNS --> Domain Name = cyberbay.net
Pri DNS
= 205.230.159.8
Sec DNS
= 205.230.159.7
List Attempt = No
9. From:
Ethernet --> Mod Config.. --> DHCP Spoofing...-->
DHCP Spoofing = No
DHCP PNP Enabled = No
10. From :
System --> Sys Config --> Name = testuser
11. From Configure --> CTR-D --> 1 = Dial
12. To Setup your PC Workstations (Windows 9x examples)
Click Start, Settings, Control Panel, Network, Configuration Tab.
Click on TCP/IP>Your Network Adapter
In the IP Address Tab input the following:
choose Specify an IP address
IP address
: 192.168.100.2 (* or one from 2 ~ 14)
Subnet Mask
: 255.255.255.240
in the Gateway tab:
New Gateway: 192.168.100.1 then add in
the DNS Configuration tab:
choose Enable DNS
Host
: username
Domain :
cyberbay.net
DNS Server Search Order:
205.230.159.8 then Add
205.230.159.7 then Add
Domain Suffix Search Order:
cyberbay.net then Add
Then OK , OK again. Windows will now ask you if you want to reboot your machine.
Answer Yes.
13. After your PC has restarted, open any internet application.
|
